With the new line of OMS^® Oxygen Resuscitation products you can build your own medical system!

Choose a cylinder and valve. Then a regulator (below), a mask, and finally a case.

Shown (Fig. 1) is a fully equipped system with a 22 cu. ft. Oxygen Cylinder and post valve, 3 in 1 Oxygen regulator (below) Demand Valve OroNasal Mask, Non-Rebreather Mask and Pocket Mask.

---

The OMS^® Demand Valve OroNasal Resuscitator/Mask System

This mask is equipped with a Demand System enabling spontaneously breathing patients to inhale 100% Oxygen. An inhalation effort by the patient will open the demand valve and oxygen will flow to the patient at a rate in line with their inhalation effort.

---

Pocket Mask with Oxygen Inlet

The current standard of care for a first responder sport diver in dealing with a non-breathing patient is oxygen supplemented mouth-to-pocket mask resuscitation. The CPR barrier combines a low-resistance, one-way valve with a hydrophobic filter to help prevent the passage of liquids and secretions. Valve and filter act as barriers separating rescuer and patient.

---

The OMS^® Nonrebreather Mask

This mask is supplied with a reservoir bag attached by a one-way valve so the victim can breathe oxygen that is delivered into the bag, but cannot exhale carbon dioxide back into the bag). The nonrebreather is used to deliver high concentrations (as a percent of inspired air, 80% to 90% oxygen at flow rates of 10 to 15 liters per minute) of oxygen.

---

Yoke Pin Indexed CGA 870 Model Regulators

0-25 lpm exiting a hose barb outlet with gauge and 2 demand outlets exiting to mask.

(Brass Body)

---

DISS Fitting CGA 540 Model Regulators

0-25 lpm exiting a hose barb outlet with gauge and 2 demand outlets exiting to mask.

(Aluminum Body)

---

3 in 1 Regulator Yoke Pin Indexed CGA 870, DISS Fitting CGA 540 SCUBA 477 300 BAR DIN Connection

0-25 lpm exiting a hose barb outlet with gauge and one demand outlet exiting to mask.

(Brass Body) Three fittings (CGA 540, CGA 870, and DIN 477 300 Bar Scuba Connection) as supplied can be installed in the regulator.

---

Copyright ^© 1998-2006 Ocean Management Systems, Inc.